![]() ![]() Towards the end, the power button on the console will start flashing green and then your console will power off.ĩ. The process takes 3-4 minutes for the system to install the old firmware. Turn the PS3 on and you will see a black screen but the PS3 HDD light will flash.Ĩ. Insert flash drive into the last USB port to the right - the first USB port in from the right side if you’re facing the console. These must be the only files on the USB drive and must be placed in the main (root) directory.ħ. Load any blank FAT32 USB flash drive with 2 files in the root directory:Ħ. You will see a huge red box on the screen saying Factory/Service Mode. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory/Service Mode. Your console will turn on and E3 Card Reader will light up the red LED followed by the blue LED.Ĥ. ![]() Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Insert E3 Card Reader that has been programmed with the downgrade software into your PS3.Ģ. Also, I suggest you backup your saved games - they’ll be long gone after the downgrade. This method is almost identical to PS Downgrade. Safely eject E3 Card Reader and now lets perform the actual downgrade. That’s it - your device has been updated. Updating E3 Card Reader with the downgrade software is extremely simple: Connect the device to your PC and drag-n-drop the “e3downgrade 12.03.bin” file to the “E3Upgrader” drive. First read this post and download the required files. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |